3
2
1
1
2
3
4
=============== Hand these instructions to the end user ===============
MANUALLY RELEASING THE GEAR MOTOR
⚠
Manually releasing the gate may cause an uncontrolled movement of the gate due to possible
mechanical anomalies or unbalancing.
RELEASE
(figure
🅱
)
- Fit the key and turn it clockwise.
- Pull outwards and activate the release handle.
LOCKING
(figure
🅲
)
To lock the operator back up, lower the lever, reposition it and turn the key clockwise.
WHAT TO DO IF ...
ISSUES
POSSIBLE CAUSES
POSSIBLE FIXES
It neither opens nor
closes
• Power supply is missing
• The gear motor is stuck
• The transmitter is emitting a weak signal or no
signal at all
• Control buttons or selectors stuck
• Check main power supply
• Lock the gearmotor
• Replace the batteries
• Check integrity of devices and/
or of electrical cables
The gate opens but
does not close
• The photocells are working
• Check that there are no ob-
structions in the photocells' area
of operation
⚠
If the problem cannot be solved by following the fixes in the table or if any malfunctions, anomalies,
noises, vibrations or suspicious and unexpected behavior is experienced on the system, call for qualified
assistance.
