27
- Manual
FA01310-EN
- 02/2020 - © C
AME S.p.A. - The contents of this manual may be changed at any time and without notice. - T
ranslation of the o
riginal instructions
Radio decoding
Choose the type of radio coding for the transmitters enabled to control the operator.
If you choose the type of radio coding for the transmitters [Rolling code] or [TW key block], any transmitters with a different type of radio coding saved
previously will be deleted.
U4
Radio decoding
1 = All decoding (default)
2 = Rolling code
3 = TW key block
Motor type
Set the type of gearmotor installed.
A1
Motor type
1 = BX704
2 = BX708
Travel calibration
Start the travel self-learning.
This function appears only if the [Encoder] function is active.
A3
Travel calibration
OFF (Default)
ON
Parameter reset
Restore factory settings except for the functions: [Radio decoding], [Motor type] and the settings related to travel calibration.
A4
Parameter reset
OFF (Default)
ON
Manoeuvre counter
View the number of operator manoeuvres.
A5
Manoeuvre counter
001 = 100 manoeuvres
010 = 1000 manoeuvres
100 = 10000 manoeuvres
999 = 99900 manoeuvres
CSI = Maintenance work
FW version
Display the firmware version number and the GUI installed.
H1
FW version