background image

TITLE

TITLE

general

 conditions

8.   TERMINATION OF THE CONTRACT
 

Came reserves the right to suspend the Service and/or terminate 

the Contract with immediate effect in the case of non-payment of the 

amount referred to in article 5 or in the case of the violation of the 

terms of articles 2.3 and/or 2.6. In this case, termination shall occur 

automatically upon receipt by the User of the notifi cation sent by 

Came, with no obligation for prior notice, without prejudice to the right 

of Came to claim compensation for any damage suffered.

9. PROVISION OF THE SERVICE. LIMITATION OF LIABILITY
9.1
  Came undertakes to ensure the ongoing provision of the Service.
9.2  Came will do everything in its power to schedule maintenance of the 

systems so as to ensure the ongoing nature of the provision. In the 

event of extraordinary and/or unscheduled maintenance, Came shall 

take all reasonable measures to reduce the inconvenience to the User.

9.3  In the event that any Service defi ciencies are due to causes not 

attributable to Came, including, but not limited to, unforeseeable 

circumstances, force majeure, technical problems related to third-party 

internet, software or hardware, interference and/or specifi c weather 

conditions, Came will not be in any way liable for the failed or faulty 

provision of the Service, nor will it be liable for any loss, damage or 

injury arising from these to the User.

10. USER DATA AND PRIVACY PROTECTION
10.1
 The subscription to the Service through the Website and the use of the 

App assume that the User grants the data necessary for the provision 

of the Service itself. To this end, the User undertakes to communicate 

correct, current and truthful data required in order to enter into the 

Contract.

10.2 The User’s personal data will be processed by Came as detailed in its 

privacy policy.

10.3 The User acknowledges that, with the prior express consent of the 

User himself/herself, Came may inform its network of installers of the 

data strictly necessary for the provision of remote assistance services. 

In particular, with the express consent of the User, the installer that 

performed the installation of the automation, home automation, 

security, temperature control and/or video surveillance system 

manufactured by Came may be associated with the system itself. In 

this way, the installer can perform remote diagnostics, also verifying 

the number of operations performed, the status of the photocells and 

the Hardware parameters, and proceed with remote assistance to help 

the User.

11.   COMMUNICATION
 

Any communication from the User that is connected and/or related to 

the Contract - including any complaints, reports, requests concerning 

the purchase and/or provision of the Service, exercising the right 

of withdrawal etc. - must be sent to the e-mail address support.

[email protected] or, by registered mail with acknowledgement 

of receipt, to the following address:

 

Came S.p.A. 

 

Via Martiri della Libertà 15 

 

31030 Dosson di Casier 

 

Treviso - Italy.

 

Any communication to the User will be sent by registered mail with 

acknowledgment of receipt or by e-mail to the addresses indicated on 

the Form.

12.  APPLICABLE LAW
12.1
 The Contract is governed by Italian law and, in particular, by the 

Italian Legislative Decree dated 9 April 2003, no. 70 on certain aspects 

of electronic commerce and, for residents of Italy, by the Italian 

Legislative Decree dated 6 September 2005, no. 206, “Consumer 

Code”, with specifi c reference to provisions relating to distance 

contracts.

12.2 In any case, any rights that may be attributed to the User by 

mandatory legal provisions, in force in the country of residence or 

domicile of the latter shall remain unaffected.

13.  DISPUTES
 

For any dispute arising under the Contract or related to it, jurisdiction 

will be exclusively as follows:

 

a) the Court of the place of residence or domicile of the User, if located 

in Italy;

 

b) the Court of Treviso (Italy), if the residence and domicile of the User 

are located outside Italy.

14.  MISCELLANEOUS
 

The Contract constitutes the entire agreement between the Parties 

with regard to the subject defi ned herein and supersedes any previous 

contracts, agreements and negotiations with the same subject.

 

Came reserves the right to make changes to the General Conditions 

at any time, publicising them to Users on this page. In the event of 

a failure to accept the changes made to the General Conditions, the 

User may withdraw from the Contract under the terms of article 7.1.

Summary of Contents for ATS-S524 KIT





























Reviews: