CAME AGTMTMVKIT, Installation Manual

Page: 11 / 16

>3’’
PROG
< 1 ’’ < 1 ’’
a a
b b c c
Pa
ge
11
- M
an
ua
l
FA01481-EN
- 0
9/
20
20 - © C
A
M
E S
.p
.A
. - T
he c
on
te
nt
s o
f t
hi
s m
an
ua
l m
ay b
e c
ha
ng
ed
, a
t a
ny t
im
e, a
nd w
ith
ou
t n
ot
ic
e. - T
ra
ns
la
tio
n o
f t
he
o
riginal
inst
ruc
tions
Programming the open-gate function
An operator control can be connected to the module auxiliary
relay and/or an operator status to the door status input.
From applicable, preconfi gured internal receivers, the relay can
be controlled using the open-gate command and/or the operator
status shown via the relevant LED on the internal receiver itself.
To confi gure the module with the open-gate function, enable the
function on one of the connected internal receivers, by entering
call programming (see previous paragraph), and send an open-
gate command from the internal receiver (press and hold the
“key” button) as an alternative to or in addition to associating
the call button. The open-gate LED lights up on this internal re-
ceiver to indicate that the function has also been enabled on
the module.
NOTE. If the module is programmed with the open-gate function,
the “door contact input” terminal will function exclusively as an
operator status indicator.
NOTE. This function is available from version 1.03.000 of the
module software.
NOTE. You can force the switch from one programming mode to
another by pressing the PROG button on the module unit for 3
seconds and releasing within 6 seconds. If you force the switch
to call programming from button programming, the button units
which have not been programmed will be confi gured to 8 calls.
If the basic module is not programmed, calls are not confi gured.
Exiting programming
Press the PROG button briefl y . The LEDs on the entry panel
switch off .
Adjusting the brightness and colour of the module
backlight
During call programming
①
, you can adjust the brightness
and colour of the module backlight. Press the left call button to
select white
②
, and the right call button to select blue
③
.
Press the same button repeatedly to select one of the fi ve bright-
ness levels (off , 25%, 50%, 75%, 100%).