Page
27
- Manual
FA
01
69
3M
4A
- 06/2022
- © C
AME S.p.A.. - T
ranslation of the original instructions
The cont
ents of this manual may change, at any time, and without notice.
Interfaces configuration
The WWAN (Wi-Fi) interface is configured in the same way
as the LAN (Ethernet) interface.
D
Choose the type of addressing between Static and DHCP.
[Static Address]
The device's IP address is manually assigned.
E
If you have chosen a static IP address, enter the device's IP,
which must belong to the same subnet as that of the router and
of the other connected devices.
F
If the netmask is different from the default one, indicate the
correct netmask.
G
Provide the default gateway for your network.
H
Enter a valid DNS address to have the CAMEConnect
connection (for example, 8.8.8.8.).
[DHCP]
The device's IP address is manually assigned by the DHCP
server; if there are no special needs, this mode lets you continue
with the settings without adding any additional data.
Status
System Network
General Options
Exit
Save & apply
Back
Protocol
IP address
Netmask
Gateway
DNS
Static Address
Interfaces - LAN
Network interface configuration
Interface configuration
General Settings
D
D
E
E
F
F
G
G
H
H
