CAME 806LA-0050, Manual

Page: 17 / 28

P
ag.
17
- Manuale
- F
A01524M4A
- 05/2022 - © C
AME S.p.A. -
DIP switch OFF = address 1 (default)
DIP switch ON = address 2
If there are two BUS fl ashing beacons connected in the system, set DIP switch 1 to OFF
on the fi rst fl ashing beacon and DIP switch 1 to ON on the second fl ashing beacon.
If the beacons fl ash red, check the DIP switch has been set correctly on both.
DIP switches 2 and 3 (not used, keep the DIP switches OFF).
DIP switch 4 (BUS communication LED).
DIP switch OFF = BUS LED deactivated (default)
DIP switch ON = BUS LED activated. The LED fl ashes when the control board on the
fl ashing beacon communicates with the control panel.
We recommend keeping the DIP switch set to OFF to avoid light pollution from the
fl ashing beacon dome during the night.
Control panel
You can confi gure the following parameters from the control panel:
- fl ashing beacon or cycle light operating mode;
- opening fl ash colour;
- closing fl ash colour;
- pre-fl ash colour;
- colour while waiting for automatic closing (where activated);
- error warning colour;
- maintenance notifi cation colour;
To make use of all the fl ashing beacon functions, ensure the control panel is running
the latest fi rmware.
Setup app
The fl ashing beacon can also be confi gured via the Setup app (locally or via CAME
Connect) using a device (CAME KEY / Wi-Fi – BLE Gateway / Slave module).
From the Setup app, in addition to confi guring the above parameters, you can also set the
fl ashing mode (normal / quick /double fl ash / on) during opening and closing.
Before confi guring the parameters, make sure the product and its accessories
are installed in compliance with the local regulations in force.