P
age
42
- Manual
FA01412-EN
- 01/2021 - © C
AME S.p.A. - The contents of this manual may be changed at any time and without notice. - T
ranslation of the o
riginal instructions
Forgotten password
If you lose the password, you will need to reset the board to its factory settings. See [Factory reset].
Factory reset
To restore the electronic board data to factory settings:
Disconnect the control board from the power supply.
Press and hold the < and > buttons, then reconnect the control board to the power supply.
Continue to press and hold the < > buttons until [Factory reset] is displayed.
Select [Confi rm YES].
Press ENTER to confi rm.
When you reset the control board, all saved users, set times and calibration operations are deleted.
Import/export data
Save user data and system confi guration data on a MEMORY ROLL card.
The stored data can be reused for another control board of the same type to carry across the same confi guration.
Before inserting and removing the MEMORY ROLL card, DISCONNECT THE MAINS POWER SUPPLY TO THE LINE.
1
Insert the MEMORY ROLL card into the corresponding connector on the control board.
2
Press the “Enter” button to access programming.
3
Use the arrows to choose the desired function.
Confi guration >
External memory >
Save data
Save user data, timings and confi gurations to the memory device (memory roll or USB key).
Confi guration >
External memory >
Read data
Upload user data, timings and confi gurations from the memory device (memory roll or USB key).
Once the data have been saved and loaded, the MEMORY ROLL can be removed.
