SW3
PR
OG
RESE
T
PROG
i
g
h
f
i
c
e
beep
SW3
PR
OG
RESE
T
PROG
SW3
PR
OG
RESE
T
PROG
SW3
PR
OG
RESE
T
PROG
<1’’
<1’’
M1
BOUT
PR
OG
M2
M1
BOUT
PR
OG
M2
SW3
PR
OG
RESE
T
PROG
>3’’
<6’’
SW3
PR
OG
RESE
T
PROG
>3’’
<6’’
a
h
Pa
ge
11
- M
an
ua
l F
A0
095
9-
EN
- v
er
s.
1 - 1
0/
20
17
- © C
am
e S
.p
.A
. - T
he c
ont
ent
s o
f t
hi
s m
an
ua
l m
ay b
e c
ha
ng
ed
, a
t a
ny t
im
e, a
nd w
ith
ou
t n
ot
ic
e.
Exiting programming.
Briefly press the PROG key
g
: the PROG LED off. NOTE. If no action is performed, the procedure will automatically end after 30 minutes.
Programming key type.
At the “Programming Call Buttons” stage, press the PROG
h
key for at least 3 seconds and then release it (within 6 seconds), as
soon as the LED PROG lights up and the key back lighting flashes as illustrated in figure
i
, entering “Programming Button Types/Combinations” as part
of the procedure.
Press the first key of the entry panel in the position indicated
until the backlighting LED stops flashing
and remains lit.
At the end, exit programming, briefly press the PROG key
g
: the PROG LED will turn off. If no action is performed, the procedure will end automatically
after 30 minutes.
Programming the call keys.
Lift the receiver (if present) of the extension that you want to programme
c
then press the door lock release
and AUX2
buttons. On the entry panel, press the call
key to be associated with the internal extension
e
: an acoustic signal will confirm that the setting
was stored. Hang up the receiver again, if necessary
f
and continue, repeating the same operations
for the other extensions.
Entering Programming Mode.
Press the PROG
a
key for at least 3 seconds and then release it (within
6 seconds) as soon as the LED PROG light flashes and the key back lighting lights up as illustrated in
figure
. Failure of the PROG LED to light up, indicates a malfunction. Check the connections and
re-access the programming mode.
Reprogramming procedure
Exiting programming.
Briefly press the PROG
key
i
: the PROG LED off. NOTE. If no action is
performed, the procedure will automatically end
after 30 minutes.
