CAME BPT TH/PLUS, Installation And Commissioning Manual

Page: 19 / 64

TH PLUS
TA/P1 TA/P1
OH/3RPI OH/PF
VAS/100MH
p.
3
- M
an
ua
l
FB
00
82
3-
EN
v.
1
- 0
7/
20
17
- © C
am
e S
.p
.A
. - T
he c
on
te
nt
s o
f t
hi
s m
an
ua
l m
ay b
e c
ha
ng
ed
, a
t a
ny t
im
e, a
nd w
ith
ou
t n
ot
ic
e.
BUS
Local power-supply
SYSTEM ARCHITECTURE
The system is made up of zone thermostats and by actuators, all of which are interconnected via a non-polarized 2-wire BUS
line. It can control up to eight thermal zones.
Each thermal zone must be fitted with one of the following devices:
TA/P1 (temperature sensor with display), THPLUS (terminal with temperature and humidity sensor), OH/SRI (temperature and
humidity sensor), OH/MT2 (module to connect two temperature sensors), OH/Z.02 (zone temperature control module).
Besides a maximum of 8 temperature zones, it is possible to connect, to the BUS line, the OH/SRE temperature humidity and
external pressure sensors, the OH/GSM.01 or the OH/ETH remote access modules, and the input/output expansion modules
for (OH/RI, OH/3RPI, etc...) BPT home automation systems and the OH/MPE6KW energy measuring device.
☞
The system has a limit of 40 modules, for reasons of communication over the BUS line.
Technical data
The terminal and other devices, connected to the BUS line,
that compose the system, must be powered via the LA BUS
terminal, by the following power-supply units:
the VAS100/MH+OH/PF
that can power up to 15 modules
plus 1 THplus terminal,
the VAS100.30+OH/PF
that can power up to 35 modules
plus 1 THplus terminal,
the OH/PF
that can power up to 35 modules plus
1 THplus terminal,
the OH/A.01 that can power up to 35 modules plus 1 Thplus
terminal.
Type TH/PLUS
Video resolution (pixels) 480 x 272
Power supply from BUS line
Power draw with VAS100MH and
VAS100.30 at 17.5 V (mA)
100
Power draw with VAS101
at 18 V (mA)
100
Power draw with OH/A.01
at 20 V DC (mA)
90
Dimensions (mm) 166 x 112 x 27.3
Operating temperature (°C) 5 ÷ 40