p.
9
- M
an
ua
l
FB
010
03
-E
N
v.
1
- 1
1/
20
17
- © C
am
e S
.p
.A
. - T
he c
on
te
nt
s o
f t
hi
s m
an
ua
l m
ay b
e c
ha
ng
ed
, a
t a
ny t
im
e, a
nd w
ith
ou
t n
ot
ic
e.
7. Associating a call number code to a group
The commands is for calling a group by entering a number code on the MTMKB keypad.
Code
A
B
2
3
.
Group
.
Call code
#
A - Type a number of maximum four digits. The number identifies a set of, minimum one and maximum five telephone numbers.
B - Enter a number with at most eight-digits
Commands to send to see the programmed parameters
2
3
.
?
.
Code
#
The message received contains the group associated with the specified call code.
2
3
.
Group
.
?
#
The message received contains the call code associated with the specified group.
8. Authorizing a telephone number to activate the door-release output and/or relay output
The command is for enabling the telephone number (C) to activate the door-release and/or relay output, via a call to the telephone
number matched to the entry panel.
Note: The number must have already been associated with a group using code 20.
Code
A
B
C
2
4
.
Enable door release
.
Enable relay
.
Phone number
#
A - Enter 1 or 0 in this field.
1 = The telephone number shown in field "C" is authorized to activate the door-release output.
0 = The telephone number shown in field "C" is not authorized to activate the door-release output.
B - Enter 1 or 0 in this field.
1 = The telephone number shown in field "C" is authorized to activate the relay output.
0 = The telephone number shown in field "C" is not authorized to activate the relay output.
C - Enter the telephone number to be authorized.
Note: the fields(A or B) left empty do not cause any change to existing programming.
Commands to send to see the programmed parameters
2
4
.
?
.
?
.
Phone number
#
The message received, contains the state of the enabled door-release and/ or relay output (1 = authorized, 0 = not authorized)
for the specified telephone number.
