Page
7
- Manual
FA01031-IT
- 08/2019 - © C
AME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - T
ranslation of the
original instructions
Page
7
- Manual
FA01403-EN
- 10/2019 - © C
AME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - T
ranslation of the
original instructions
Page
7
- Manual
FA01403-EN
- 10/2019 - © C
AME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Original instructio
ns
This product complies with the relevant directives in force.
Decommissioning and disposal.
Dispose of the packaging material and the device at the end of its life cycle
responsibly, in compliance with the laws in force in the country where the product is used. The recyclable com-
ponents are marked with a symbol and the material's ID marker.
THE DATA AND INFORMATION SHOWN IN THIS MANUAL ARE TO BE CONSIDERED AS SUBJECT TO CHANGE AT ANY TIME AND WITHOUT THE NEED
FOR ANY ADVANCE WARNING.
MEASUREMENTS, UNLESS OTHERWISE INDICATED, ARE IN MILLIMETRES.
RESTORE FACTORY DEFAULT
To restore the entry panel to the default settings (including the terminal functions
,
), remove the power
supply, press and hold the two call buttons on the unit and power the device.
After 5 seconds the entry panel restarts.
?
If the entry panel does not restart, it has not been restored to default settings.
