Pa
ge
21
- M
an
ua
l c
od
e
FB
00
84
0-
EN
- v
er
s.
1
- 0
9/
20
17 - © C
am
e S
.p
.A
. - T
he c
on
te
nt
s o
f t
hi
s m
an
ua
l m
ay b
e c
ha
ng
ed
, a
t a
ny t
im
e, a
nd w
ith
ou
t n
ot
ic
e.
Use the arrows to activate (ON) or
deactivate (OFF) the automatic advance.
Press the button to move on to the
next parameter to be configured.
Use the arrows to change the de-
tected temperature for the desired value.
Press the button to move on to the
next parameter to be configured.
Enabling/disabling automatic advance
This function enables the device to
automatically adapt
the system start-up time, to ensure the
desired temperature at the time set.
The advance is calculated according to the difference between the temperature detected and the
one set. An advance can be up to a maximum of three hours prior to the time set for the temperature
to be reached.
Operation example
If the device is programmed to 20°C at 7.00 a.m. and
the automatic advance is not active
, at 7.00
a.m. the system will come on, without guaranteeing 20°C at 7.00 a.m.
If
automatic advance is on,
the programmable thermostat will switch the system on earlier so as
to try to reach 20°C at 7.00 a.m. Thanks to the auto-recognition mechanism, the programmable
thermostat stores the thermal parameters of the room in order to be more accurate on subsequent
days in reaching the temperature set.
Changing the calibration of the temperature detection probe
If the location of the device does not permit suitable detection of the temperature, the detected
temperature can be changed by ±3°C, with increases of a tenth of a degree.
