T3
T2
T1
ON
0
4
8
12
16
20
0
23
1
7
C
1 2 3 4 5 6 7
B
T3
T2
T1
ON
0
4
8
12
16
20
0
23
1
7
C
1 2 3 4 5 6 7
A
T3
T2
T1
ON
0
4
8
12
16
20
0
23
1
7
C
1 2 3 4 5 6 7
C
Page
14
- Manual code
FB00804-EN
- Ed.
1
- 07/2017 - © C
ame S.p.A. - The cont
ents of this manual ar
e t
o be consider
ed as subject t
o change at any time and without the need for any advance warning.
Press button
C
.
In place of the current time, h01
will appear on the display.
Timed frost-protection programme
If you want to keep the frost-protection programme on for a pre-set number of hours or
days, proceed as follows.
Timed activation
After activating the frost-protection programme as explained above.
The programme graphic disappears from the display and the pre-set temperature for the
frost-protection programme appears for 5 seconds.
After 5 seconds the room temperature measured is shown again.
Press button once. The seg-
ment underneath symbol con-
firms that the programme has been
activated.
Use of frost-protection programme
The programme is designed to keep the heating system on at a safe temperature to avoid
possible freezing of pipes.
Use buttons
to set a tem-
perature value between 2°C and
35°C that will be kept constant
until new adjustments or until the
activation of a different operating
programme.
