![CAMDEN Invision TAC Series Installation Manual Download Page 42](http://html1.mh-extra.com/html/camden/invision-tac-series/invision-tac-series_installation-manual_3618950042.webp)
CV-TAC400 Installation Guide |
42
File: CV-TAC400_IN_MAN__NF_REV6.doc
Revised: September 2, 2014
Part No: 40-82B113
ELP Time and Date:
2009
–Oct-19
Monday
16:14:16
A. Logging In
To access the service mode for configuration the user must login with a password. To do this, follow
the steps below:
Press and hold the 1, 4 and 7 buttons until the display shows “Enter password [_ ]”.
Enter the CV-
TAC400’s password. The default Password is “1234#”.
The Main Menu will be displayed.
Note: To access additional menu items press # to move down and * to move up the menu.
If you enter the wrong password five times in a row, you will be locked out of the unit for 2 Hrs. Even
the help code will not be available.
If the wrong password is entered,
the display will show: “Password Incorrect”. You may then repeat the
process.
From the main menu select 4:. Date & Time
The Date and Time menu allows changing the CV-
TAC400’s date and time. When the Date and Time
menu is selected, a display similar to the example figure below will be displayed.
To change the date or time, you position the cursor under the item you want to change and then use
the 1 and 3 keys to increment or decrement that item. The # key moves the cursor right, and at the end
of the line moves down to the next line. The * key moves the cursor left, and at the left end of the line
the cursor moves up to the next line.
When you have finished changing the date and time, the 0 key exits to the main menu.
The following table summarizes how the keys affect the display:
Key
Action
#
Moves cursor right and down
*
Moves cursor left and up
1
Increments the value above the cursor
3
Decrements the value above the cursor
0
Exits the date and time menu
4. Date and Time
5. Exit
Main Menu
1. Event Log
2. Data Display
3. Service Menu