CX-EPD 2850L Pre-Load Electric Strikes Installation Instructions and Technical Support
6)
Check the gap between the door and the frame (with the door in the closed position) to ensure it is equal from
top to bottom, if it is not equal, make the necessary adjustments to correct this issue. If the gap is equal, and is
greater than 1/8” please ensure you “notch” the frame as shown below.
7)
ALWAYS remember to check, that the voltage selector is set to the correct voltage you are providing, and
ALWAYS check the voltage from your power supply (while under load), with a multi-‐meter to make sure it is
supplying the correct voltage.
5502 Timberlea Blvd.,
Mississauga, ON Canada L4W 2T7
www.camdencontrols.com
Toll Free: 1.877.226.3369
File: CX-EPD 2850L _NF_MAN_Rev2.doc
Revised: Wednesday, July 17, 2013
Part No.: 40-82B142
