Standalone Keypad/Prox Access Control
• Remove the back cover from the keypad using the
supplied special screw driver
• Drill 2 holes on the wall for the Self tapping screws and
1 hole for the cable
• Put the supplied wall plugs into the two holes
• Attach the back cover firmly to the wall with the
2 Self tapping screws
• Thread the cable through the cable hole
• Attach the keypad to the back cover
6. Installation
7. Wiring
Color
Function
Description
Pink
BELL_A
Doorbell
Pale Blue
BELL_B
Doorbell
Green
D0
Wiegand output D0
White
D1
Wiegand output D1
Grey
ALARM
Alarm negative (alarm positive connected 12 V+)
Yellow
OPEN
Exit button (the other end connected GND)
Brown
D_IN
Door Contact switch (the other end connected GND)
Red
12V+
12V + DC Regulated Power Input
Black
GND
12V - DC Regulated Power Input
Blue
NO
Relay Normally Open
Purple
COM
Relay Common
Orange
NC
Relay Normally Closed
Common power supply diagram:
Power supply
BELL_A
PINK
D_IN
BROWN
D0
GREEN
GND
BLACK
ALARM
GRAY
COM
PURPLE
BELL_B
PINK
+12V
RED
D1
WHITE
NO
BLUE
OPEN
YELLOW
NC
ORANGE
Bell
Connect
Alarm
Exibit Button
Door Contact
12V +
-
Fail Secure Lock
Fail Safe Lock
Page 3 of 8
+
