Standalone Keypad/Prox Access Control
5. Specifications
Operating Voltage
12V DC ±10%
User Capacity
2,000
Card Reading Distance
1.25” to 2.4” (3 cm to 6 cm)
Active Current
< 60mA
Idle Current
25±5 mA
Lock Output Load
Max 3A
Alarm Output Load
Max 20mA
Operating Temperature
-49°F to 140°F (-45°C to 60°C)
Operating Humidity
10% - 90% RH
Waterproof
Conforms to IP 68
Adjustable Door Relay time
0 - 99 seconds
Adjustable Alarm Time
0 - 3 minutes
Wiegand Interface
Wiegand 26 bit
Wiring Connections
Electric Lock, Exit Button, External Alarm, External Reader
Dimensions
5 15/16” H x 1 3/4” W x 1” D (150 mm x 44 mm x 25 mm)
Page 2 of 8
4. Quick Reference Programming Guide
To enter programming mode
*
Master Code
#
999999 is the default factory master code
To exit from the programming mode
*
Note: You must be in programming mode to program the following feature.
To change the master code
0
New Code
#
New Code
#
The master code can be 6 to 8 digits
To add a PIN user
1
User ID Number
#
PIN
#
The ID number is any number between 1 & 2000. The
PIN is any four digits between 0000 & 9999 with the
exception of 1234 which is reserved. Users can be
added continuously without exiting programming mode.
To add a card user
1
Read Card
#
Cards can be added continuously without exiting
programming mode
To delete a PIN or a card user
2
User ID Number
#
for a PIN user or
2
Read Card
#
for a card user
Users can be deleted continuously without exiting
programming mode.
To unlock the door for a PIN user
Enter the
PIN
then press
#
To unlock the door for a card user
Present the card
