Camco V8, User Manual, Page: 24 / 36

VORTEX
S I LV E R SE R I ES
1
2
3
4
5
USER MANUAL
VORTEX SILVER SERIES V8
P.23
4.10 Filter Cleaning
The air intake on the front of your V8 amplifier is fitted with a removable fil-
ter system. If the filter becomes clogged, the unit will not cool as efficiently
as it should and may result in reduced output levels.
V8 Filter Assembly
1 Clip Aperture
2 Injection Molded Cradle
3 Foam Filter
4 Injection Molded Surround
5 Injection Molded
CAMCO Badge
For changing the filter, no tools are required: first, gently slide the whole
plastic filter assembly a few millimeters to the left and lift it from the front
panel. Next, beginning on one of the long sides, carefully unclip the mold-
ed surround (4) from the cradle (2) and then carefully pull the
CAMCO
badge (5) out of the four fastening holes with both hands. Remove the
foam filter (3) and clean it with a mild dishwashing detergent and warm
water. Once dry, replace the foam filter carefully into the cradle and repeat
the dismantling procedure in reverse. Insert the five pins on the filter frame
into the clip apertures (1) and slide the filter carefully to the right to secure.
4 OPERA
TION