2
1.
Shelf Section.
2.
Three Rigid Poles, one 36" x 1
1
⁄
2
" & two 36" x 1
1
⁄
4
"
with base unit and umbrella models or four 49"
Telescopic Poles and one 36" x 1
1
⁄
2
" Rigid Pole for
units with canopy.
3.
One clear panel 11
1
⁄
4
" x 78
3
⁄
4
".
4.
One clear panel 14
1
⁄
2
" x 40
5
⁄
8
".
5.
Two pole plugs for rear holes operator side. Base
model and umbrella models only.
6.
One menu board.
7.
One drawer.
Shelf and Sneeze Guard Only
1.
CamKiosk models KVC854, KVC854U,KVC856,
and KVC856U include 36" Rigid Poles.
2.
Place 36" poles into sockets along the front
(customer) side of main body counter. Take note
that the center pole is of a larger diameter than
the end poles.
3.
Set the bottom clear panel (11
1
⁄
4
" x 78
3
⁄
4
")into
the groove along the front edge or customer side
of the countertop.
4.
Slide shelf section down over poles until shelf
rests firmly on clear panel.
5.
Tighten thumb screws until shelf has a level
appearance. (3 places)
6.
Slide the small sneeze guard panel
(14
1
⁄
2
" x 40
5
⁄
8
") over center pole and end pole on
narrow side of shelf. Make sure bottom edge of
panel fits into groove on shelf.
7.
Tighten set screws at the base of each pole.
I. Part List
II. Assembly Instructions
1.
3.
5.
6.
2.
4.
Bottom Sneeze Guard
Shelf
36" Pole
Small Sneeze Guard
Thumb Screw
End Caps
Black Bushing with
Set Screw
3-Lobe Knobs
7.
