background image

www.cambro.com

II. Safety Instructions and Warnings

IMPORTANT: Please read ALL instructions prior to first use. Follow all warnings and instructions marked on charger unit and in this manual. 
Use only CAMBRO

®

 authorized replacement parts.

For service please contact Cambro Customer Service Department at CEL Germany: (49) 7022 90 100 0. Chargers under warranty must be serviced by a 
Cambro Authorized Service Agent ONLY to remain under warranty. Please refer to Warranty section in the back of user manual for coverage details.

WARNING! ELECTRIC SHOCK HAZARD. 

Use only supplied cord. Must be installed by a qualified technician and according to local technical requirements. 

•  

WARNING!

 Do NOT use if power cord is frayed or damaged or plug blades are missing, bent or broken.

•  

WARNING!

 USE only power supply source as indicated on label on back of charger.

•  

WARNING!

 Connect into properly grounded power source ONLY.

•  

CAUTION!

 Do NOT use in wet or damp conditions.

•  

WARNING!

 NEVER place wet Camduction

®

 Base in compartment.

OWNER’S

MANUAL

CAMBRO

®

 CAMDUCTION

®

 

COMPLETE HEAT SYSTEM

This Owner’s Manual applies to all of the following product models: 

Model MDSCDC9X5EU24V 

For use with CAMBRO Camduction Base MDSCDB9EU24V

Table of Contents

I. 

Introduction ..........................................................................................................1

II.

Safety Instructions and Warnings ...................................................................1-2

III. Product Specifications ........................................................................................2
IV. Set Up and Operating Instructions .....................................................................3
V.  Cleaning and Maintenance ...............................................................................3-4
VI. Product Drawings .................................................................................................5
VII. Troubleshooting Guide ..........................................................................................6
VIII. Cambro Warranty and Product Liability .............................................................7

Congratulations on the purchase of your new Cambro Camduction 
Complete Heat Charger. Here is a step-by-step guide for proper operation 
and maintenance. If you have any questions, please contact your Cambro 
representative or contact Customer Service Department at CEL Germany  
(49) 7022 90 100 0. All Warranty Service must be performed by a Cambro 
Authorized Service Technician. Please refer to Warranty Section for coverage 
and details. Service on Out-of-Warranty repairs MUST be performed by a 
Qualified Technician or Electrician.

I. Introduction

Camduction Charger covered  
by European Patent 2386234.

Summary of Contents for CAMDUCTION MDSCDC9X5EU24V









Reviews: