If in any doubt about how to correctly operate or maintain your Cambrionix system
product or OEM module, or if any part of this safety document is unclear or confusing,
please do not use your product and contact Cambrionix before proceeding further.
Important Electrical and Safety Messages
Safety warning
Potential consequence if ignored
Do not modify the product in any way.
Fire, electric shock or personal injury may occur.
Do not dismantle the product.
Fire, electric shock or personal injury may occur.
Do not bend, compress or drill into any part of the product.
Damage, electric shock or personal injury may occur.
Parts of Cambrionix products may become hot during
operation. Do not obstruct air vents on the product or operate the
product in an environment where the ambient temperature is outside
the recommended operating temperature region.
An increased internal temperature may cause a fire.
Cambrionix products are not reverse-polarity protected.
The power connections MUST be connected correctly.
If in doubt, please contact Cambrionix.
Damage to your Cambrionix product may occur. A fire or electric shock
may result.
Do not short circuit the Power Supply Unit (PSU) supplied
with your Cambrionix product.
Sparks, fire or electric shock may result.
Ensure dust does not collect around the power plug pins
or power socket, or in or around the air vents to the extent
it causes a reduction in air circulation.
A fire may result if there is combustible material within the power
socket or around the power plug, or if the internal
temperature increases due to lack of air circulation.
Do not allow liquids to come into contact with the unit or
power supply.
Fire, electric shock or personal injury may occur.
Keep the mains power socket (where the power cord is
connected) unobstructed.
The power cord must be disconnected to cut off power to the product
when an issue occurs. Note that the product may not be completely
powered down by only using the power switch on the product.
Do not use a damaged power cord or plug, or a loose power socket.
An electric shock or fire may result.
Do not power multiple products from a single power socket.
Overheated power sockets may cause a fire.
Do not touch the power plug with wet hands.
An electric shock may result.
Insert the power plug all the way into the socket so that it is not loose.
An unsecured connection may cause a fire.
Connect the power plug to an earthed socket.
Failure to connect use an earthed socket may result in an electric
shock or injury.
Do not bend or pull the power cord with force. Be careful not
to leave the power cord underneath a heavy object.
Damage to the power cord may result in fire or electric shock.
Do not place the power cord near heat sources.
A fire or electric shock may result.
Only use the power cord provided (if applicable).
A fire or electric shock may result.
Only use the power supply provided with the product
(if applicable).
A fire or electric shock may result.
Do not disconnect the power cord while the product is being used.
The product may become damaged by electric shock.
Cambrionix OEM modules are susceptible to Electrostatic Discharge
(ESD). OEM modules should be handled in an ESD safe area.
Damage to your Cambrionix OEM module may occur.
There are sharp edges, corners and components.
Suitable protective equipment must be worn during handling
of Cambrionix OEM modules.
Personal injury may occur.
No power supply is shipped with a Cambrionix OEM module. Please
contact your power supply manufacturer directly for safety related
information.
Fire, electric shock or personal injury may occur. Please see the
installation instructions for your Cambrionix product for correct wiring
requirements.
When mounting a Cambrionix OEM module, all mounting holes should
be used with appropriate spacers, screws and a torque level of 1.1Nm.
Damage or personal injury may occur.
This product can expose you to chemicals, including Nickel, which is known
to the State of California to cause cancer or birth defects or other reproductive
harm. For more information, go to www.p65Warnings.ca.gov
8
Safety Guidelines and Precautions
Please read and understand these
guidelines prior to installation or use.
The TS3-16 has ESD, over-voltage, over-current
and over-temperature protection. However, to use
the equipment safely you should follow all local
regulations relating to the use of electrical
equipment and note that:
• Failure to install and operate the equipment
in accordance with all local and these safety
guidelines may result in unit failure, electrical
shock and personal injury.
• The plug on the power cord is considered the
“disconnect device” and consequently the mains
outlet should be located near the TS3-16, easily
accessible in case the power supply needs to be
isolated from the mains power.
• If there is a liquid spillage over a ventilation
slot, external data/power connector or product
aperture, remove power from the unit without
contacting the liquid immediately.
ThunderSync3-16
USER GUIDE
11
Summary of Contents for ThunderSync3-16
Page 1: ...ThunderSync3 16 USER GUIDE Charge Connect Manage ...
Page 2: ......
