PP8S
Página 23 de 38
PRECAUCIÓN
Su firmware de Cambrionix podría estar dañado
l
Do not interrupt the Firmware update process.
l
Do not disconnect the power during the update process.
5.5.7 Instrucciones de línea de comandos (CLI)
Command Line Instructions can be used to control and monitor the functions of the
hub and attached devices. To use the command-line interface a serial terminal emulator must
be installed on the host computer. Algunos ejemplos son Serial, ZTerm, PuTTy y Minicom. If you
would like more information, please look at our more in-depth information here:
www.cambrionix.com/cli
Two example commands can be seen below, you can use these commands to check hub
information and health.
Comando
Acción
system
Mostrar información de hardware y firmware
health
Mostrar voltajes, temperaturas, errores e indi-
cador de arranque
