CAMBRIONIX ModIT-MAX, Manual

Page: 22 / 43

ModIT-MAX Página 21 de 41
sudo apt install ./
after this command you will need to enter the file name that has just been downloaded from
our website.
5.5.2 LiveViewer
LiveViewer is an application downloaded from www.cambrionix.com/products/liveviewer . Once
downloaded and installed on the host computer, LiveViewer allows you to switch the ports on
and off and set the port mode. LiveViewer’s home page shows the following information about
all the ports:
• Status (Attached/disconnected)
• Mode (Charge/Sync/Off)
• Profile (Charging profile)
• Duration (How long the device has been attached)
• End time (Time the battery reaches a threshold (full) level)
• Current (Quick charge current in mA)
• Energy (Present energy rate)
Tick boxes adjacent to each port symbol allow that port mode to be changed when the "enable
port controls" is selected. When the port is in Sync mode, only instantaneous current can be
monitored through LiveViewer. When the port is in Charge mode, the charge profile, current,
energy rate, charge duration and end time are displayed. In addition to individual port
information and control, LiveViewer shows the hub rail voltages, time since switched on, total
current and power, and temperature. Further details on LiveViewer are available on our website.
Configuración de NVRAM
Dentro de su concentrador, hay algunas configuraciones controlables específicas llamadas
"configuraciones de RAM no volátiles", que se conocen como configuraciones de NVRAM. These
control a variety of different settings on your ModIT-MAX.
Puede navegar a la configuración de NVRAM abriendo LiveViewer y seleccionando el
concentrador al que desea conectarse. Una vez que haya elegido el concentrador conectado,
navegue hasta el ícono a continuación en la parte superior derecha de la pantalla desde
LiveViewer y luego haga clic en Avanzado en la parte inferior de la página
Una vez que haya presionado avanzado, lo llevará a la página de configuración avanzada donde
puede ver y cambiar la configuración de NVRAM, incluida la reversión a la configuración
predeterminada de fábrica.