4
Overloading
Do not overload wall outlets or extension cords as this can result in a risk of
fire or electric shock. Overloaded AC outlets, extension cords, frayed power
cords, damaged or cracked wire insulation and broken plugs are dangerous.
They may result in a shock or fire hazard.
Be sure to insert each power cord securely. To prevent hum and noise, do not
bundle the interconnect leads with the power cord or speaker leads.
Cleaning
To clean the unit, wipe its case with a dry, lint-free cloth. Do not use any
cleaning fluids containing alcohol, ammonia or abrasives. Do not spray an
aerosol at or near the unit.
Battery disposal
Please dispose of any discharged batteries according to local environmental/
electronic waste disposal guidelines.
Connections
Before making any connections, make sure all power is turned off and only
use suitable interconnects.
Servicing
These units are not user serviceable. Never attempt to repair, disassemble or
reconstruct the unit if there seems to be a problem. A serious electric shock
could result if this precautionary measure is ignored. In the event of a problem
or failure, please contact your dealer.
This unit is intended to be used in conjunction with the WiFi Dongle
please observe the statements below when using with WIFI.
Wi-Fi information
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR
ELECTROMAGNETIC COMPATIBILITY
We, Cambridge Audio, of Gallery Court, Hankey Place, London SE1
4BB, declare under our sole responsibility that this device,
CXU with Wi-Fi module
to which this declaration relates, complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may
cause undesired operation.
Caution: Exposure to Radio Frequency Radiation.
The device shall be used in such a manner that the potential for human
contact during normal operation is minimized.
When connecting an external antenna to the device, the antenna shall be
placed in such a manner to minimize the potential for human contact during
normal operation. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy,
and if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged
to try and correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate
this equipment.
IMPORTANT Note:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
2 .4GHz operation of this product in the USA is firmware-limited to channels
1 through 11.
Modifications
The FCC requires the user to be notified that any changes or modifications to
this device that are not expressly approved by Cambridge Audio, may void
the user's authority to operate the equipment.
Canada-Industry Canada (IC)
IC number: 9095A-752BD004
This radio transmitter model number WD752-BD-N has been approved by
Industry Canada.
This Class B digital apparatus complies with Canadian standard ICES-003.
This device complies with Industry Canada License exempt RSS standard(s).
Operation is subject to the following two conditions.
(1) this device may not cause interference and (2) this device must accept
any interference, including interference that may cause undesired operation
of the device.
IMPORTANT NOTE:
IC Radiation Exposure Statement
This equipment complies with RSS-102 limits set fourth for an uncontrolled
environment. This equipment should be installed and operated with a
minimum distance of 20cm between the radiator and your body.
The transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Industrie Canada (IC)
Nombre IC: 9095A-752BD004
Cet émetteur radiophonique numéro de modèle WD752-BD-N a été approuvé
par Industrie Canada.
Cet appareil numérique de Classe B est conforme à la norme canadienne
ICES-003. Cet appareil est conforme aux normes RSS exemptes de licence
d’Industrie Canada. Son fonctionnement est soumis aux deux conditions
suivantes :
(1) cet appareil ne doit pas provoquer d'interférence nuisible et (2) cet appareil
doit accepter toute interférence reçue, y compris les interférences pouvant
provoquer un fonctionnement indésirable.
Summary of Contents for CXU
Page 1: ...CXU UNIVERSAL DISC PLAYER...
