CAMBRIDGE CAM30WMEF, Installation And Operation Instructions Manual

Page: 15 / 17

Replacing The Rock/Log Set And Light Bulbs
TO CHANGE LOG/ROCK SET (NOTE: MAKE SURE FIREPLACE IS TURNED OFF AND HAS BEEN UNPLUGGED
FROM ELECTRICAL OUTLET BEFORE ATTEMPTING TO CHANGE THE LOG/ROCK SET):
1. Place fireplace on a flat, level surface (FIG 1).
2. Remove 3 screws located on each side of glass face of fireplace (FIG 2 and FIG 3).
3. Remove screws that attach the log/rock set to the front of fireplace (FIG 4).
4. Replace with the desired set
（
log/rock
）
and re-assemble new set by inserting and tightening
screws(FIG 5).
5. Re-assemble glass face to fireplace by inserting and tightening screws on both side of glass
face (FIG 6).
FIG 1
FIG 4 FIG 5 FIG 6
FIG 2 FIG 3