1
Quick Start Guide
Basic functions
To switch on the reader, hold the central button (for approximately 1 second) until
the reader beeps. The DuoFertility icon will flash white. The reader also switches on
when connected to your computer.
The reader turns itself off automatically; after about a minute, the reader icons will
not be lit, indicating that the reader is off.
Getting started
You can start to use DuoFertility at any point during your cycle. To set up your
monitor ready for use:
1.
Connect your reader to your computer using the USB cable provided
2.
Download the relevant software from the launch window
3.
Launch the software
4.
Follow the on-screen instructions for the initial welcome process
You are now ready to start monitoring your cycle:
1.
Use one of the adhesives provided to start wearing the sensor under one of
your arms. Make sure that you position the sensor so the side with the large,
blue circle is facing your skin. Remember to wear the sensor while you are
sleeping.
2.
After a couple of days, transfer the data from the sensor to your reader. To
do this:
o Turn on your reader by pressing the central button
o Press the central button a second time. You should see a yellow light
moving backwards and forwards on the light scale
o Whilst the yellow light is moving, position the sensor over the central
button. The reader should ‘recognise’ the sensor and a green light should
appear on the left hand side of the light scale. During the download it will
move slowly to the right hand side.
o The reader will signal a successful download by sounding a low beep,
followed by a high beep, and the green ‘today’ arrow should light up in green.
After you have been using DuoFertility for approximately one cycle, your fertility
status should start to be displayed on the reader light scale after the download and
on the software graph on your computer.
It is important for you to read the rest of the User Manual to learn about how to use
the product in greater detail.
