5
Examine each speaker unit
carefully for shipping damage. If
there is any, do not install or use
the system. For advice, call the
store where you made your
purchase.
All of the items shown in the
illustration below should be
included with your system.
Inspecting For Damage
Please note that the type of
adapter supplied varies according
to country. If anything is
missing, contact the retailer
where it was purchased.
Save the carton and its inserts
in case you need to ship or move
your SoundWorks Digital system
later.
Installation Sequence
1. Read through the
instructions before installing
the speakers.
2. Place the satellites and
subwoofer at appropriate
sites near your computer.
3. Connect the satellites to the
subwoofer. Leave all the
wires accessible.
4. Connect your sound card
output to the subwoofer.
5. Connect the volume control
to the subwoofer.
6. Connect the power supply
adapter to the subwoofer.
7. Listen to the system and
adjust the bass level control
for pleasing bass output.
8. You may wish to experiment
with satellite placement
briefly before concealing the
connecting wires and
making the installation
permanent.
Subwoofer/amplifier
Satellite speakers (2)
15 VDC external power supply
Volume with 6ft / 2m audio
connecting cable
RCA-to-RCA
Cable, 6ft / 2m
Stick-on feet for cubes
(2 sets)
Semipermanent mounting strip
for attaching volume control
9ft / 3m speaker wires for
connecting satellites (2)
Stereo audio cable, 6ft / 2m
(Green miniplugs)
Desktop stands for
satellites (2)
RCA-to-mono cable
Wall-mounting hardware
for satellites (2)
“Hook and loop” for attaching
satellites to computer monitor (4)
SWDrev.fm Page 5 Tuesday, October 17, 2000 2:03 PM
