1
FCC Part 15: This equipment has been tested and
found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, this
notice is not a guarantee that interference will not occur
in a particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try one or more of
the following measures:
Notice for the USA
All cables used to connect the computer and
peripherals must be shielded and grounded. Operation
with non- certified computers or non- shielded cables
may result in interference to radio or television
reception.
Modifications
Any changes or modifications not expressly approved
by the grantee of this device could void the user’s
authority to operate the device.
Notice for Canada
This apparatus complies with the Class B limits for
radio interference as specified in the Canadian
Department of Communications Radio Interference
Regulations.
Cet appareil est conforme aux normes de CLASSE “B”
d’interference radio tel que spe’cifie’ par le Ministère
Canadien des Communications dans les règlements
Reorient or relocate the receiving antenna.
Increase the distance between the
equipment and receiver.
Connect the equipment to an outlet on a
circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced
radio/ TV technician.
CAUTION: To comply with the limits for the Class B
digital device, pursuant to Part 15 of the FCC Rules,
this device must be installed with computer equipment
certified to comply with the Class B limits.
Safety & Regulatory Information
The following sections contain notices for various countries:
Declaration of Conformity
According to the FCC96 208 and ET95- 19
Name:
Creative Labs Inc.
Address:
1901 McCarthy
Boulevard Milpitas, CA. 95035
United States
Tel: (408) 428-6600
declares under its sole responsibility that the product
Trade Name:
Creative Labs/
Cambridge SoundWorks
Model Number:
CSW250
has been tested according to the FCC / CISPR22/85
requirement for Class B devices and found
compliant with the following standards:
EMI/ EMC: ANSI C63.4 1992, FCC Part 15
Subpart B
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful
interference, and
2. This device must accept any interference
received, including interference that may
cause undesirable operation.
Ce matériel est conforme à la section 15 des régles
FCC. Son fonctionnement est soumis aux deux
conditions suivantes:
1. Le matériel ne peut étre source
d’interférences et
2. Doit accepter toutes les interférences reques,
Y compris celles pouvant provoquer un
fonctionnement indésirable.
Compliance Manager
Creative Labs, Inc.
August 26, 1999
Compliance
This product conforms to the following Council
Directive:
Directive 89/ 336/ EEC, 92/ 31/ EEC (EMC),
73/ 23/ EEC (LVD)
WARNING: To prevent fire or
shock hazard, do not expose this
appliance to rain or moisture.
Important Notice
The serial number for the SoundWorks Digital is
located on the subwoofer. Please write this number
down and keep it in a secure area. This is for your
security.
q
q
q
q
q
SWDrev.fm Page 1 Tuesday, October 17, 2000 2:03 PM
