MR Confon Starter f MKII+ User Guide
071-CRS-N3001-R01
23
To boot AudioFile into
USB Audio
mode, insert the AudioFile SD card in your
computer’s SD slot and open the
Config.xml
file in the card’s
Firmware
folder
using the Windows Notepad utility. In the
Config.xml
file, locate the “Entry
DeviceType” option. By default this is set to AUDIOFILE. Replace the
“AUDIOFILE” option with “USB Audio” as indicated in the comment in the file.
#DeviceType Is Either "AUDIOFILE" Or "USB Audio"
<Entry DeviceType="AUDIOFILE"/>
Save the
Config.xml
file, then eject the SD card from the computer.
Return the SD card to AudioFile and connect the device to your computer using
the USB cable supplied the AudioFile package. The device will boot in
USB Audio mode. Use the Cable 9 to connect AudioFile to the amplifier as
shown in Figure 29.
Figure 29 : Installing AudioFile
Note: Connect AudioFile to the
IN Stim
port or IN 3 port, depending on the
amplifier operating mode. For more information on the amplifier mode, see
Changing the Amplifier Mode
on page 29 of
Getting Started
.
