www.CambridgeElevating.com
August 2017
19
PART 3 – SUBMITALS
3.1 Approval Drawings
Approval drawings shall show a complete layout of elevator equipment, including plan and elevation
views.
PART 4 – PRODUCT
4.1 Equipment Manufacturer
The elevator shall be manufactured by Cambridge Elevating Inc.
4.2 Components
The elevator will have the following components.
4.2.1 Cab
4.2.1.1 Car sizes
(please visit our full drawings pages at (http://cambridgeelevating.com/tools)
Please refer to the
Drawings
pages for representative standard sizes.
Custom cab sizes are available,
please consult your authorized dealer or CE sales representative.
** A minimum cab width of 44” is required for 2-speed/panel doors.
4.2.1.2 Cab Configuration
Inline (enter/exit same side), 90 degree or straight-thru layouts available.
4.2.1.3 Cab Construction
Metal bracket and/or tubular frame structure with melamine, veneer, stainless steel or laminate finish
panels. Ceiling white melamine or to match walls. Rough plywood floor is supplied - finish flooring by
others.
4.2.1.4 Car Operating Panel
A brushed stainless steel flush panel is built into the cab wall. Floor selection pushbuttons with a dual color
LED floor number and annular ring. Alarm button, emergency stop button, emergency light and integral
phone box with phone and hinged cover are included.
Summary of Contents for Cambrian
Page 8: ......
