11
Connection to a Smart TV using TOSLINK optical
Important Note: Only connect one co-axial OR optical cable to each digital input. The unit will not operate properly if both connections are made (even
if only one is active).
This unit only accepts two-channel LPCM/Stereo PCM digital audio, and cannot be used with Dolby Digital 5.1, or DTS signal. If connecting a DVD/BD
player, a smart TV or similar device please ensure that the output is set to two-channel PCM.
If there is no sound output once the input, and output connections have been made, please follow the steps below:
Check that the interconnects between the DacMagic 200M, and the amplifier are securely connected.
1.
Confirm that the correct incoming source is selected via the corresponding LEDs on the front panel of the DacMagic 200M.
2.
