AX
R85
AX
R100
ENGLISH
SPEAKER B CONNECTIONS
The Speaker B connections on the back of the amplifier allow for
a second set of speakers to be used (i.e. speakers located in another room).
The Speaker A/B button on the front panel and remote control allows the two sets of
speakers to be toggled on and off. Refer to the Front Panel or Remote Control section
of this manual for more information on the Speaker A/B operation.
BI-WIRE CONNECTIONS
If your loudspeakers are equipped with two sets of terminals, then it is possible
to connect them in the bi-wire configuration. Bi-wiring sends the bass and treble
frequencies down separate speaker cables, resulting in a clearer, more focussed
sound.
Note:
– Speaker A and B must both be selected for this type of connection to
work.
– Remove the bi-wire link on the speaker terminals before connecting.
Refer to your speakers’ manual for more information.
AXR
Speaker A
Main Room
Speaker B
Room Two
HF
LF
Either A or B, or both A and B may be selected for use.
Note: When using two pairs of speakers, use speakers with a nominal
impedance of
16
ohms each.
HF
LF
HF
LF
HF
LF
Right
speaker
Left
speaker
Red
Red Black Black Red
Black
Red
Black
Red
Black
Red
Black
