Instruction Manual
CSMFC-3 Manual Follow Focus
2
Changing the rotation direction
(note: CW = clockwise and CCW = counter clockwise)
Not all lenses use the same focus direction, for instance Canon lenses focus the opposite direction as Nikon. You can
change the direction by flipping the focus housing
(K)
in relation to the clamp arm
(D)
. Please unscrew bolt (J), flip the
focus housing
(K)
and reattach bolt
(J)
in the mounting hole of the clamp arm
(B)
.
The images below indicate the direction in relation to the position of the focus housing
(K)
.
Focus-knob CCW > Focus-ring CCW
Focus-knob CW > Focus-ring CCW
Change the angle of the focus unit
The focus housing
(K)
can be set to different angles, as shown in the image above. Please unscrew the clamp knob
(E)
and tilt the focus housing up or down to the desired angle. Ensure that the focus-gear is pressed gently to the lens-gear
and tighten clamp knob
(E)
.
Change lenses
If you want to change a lens, please loosen clamp knob
(E)
, tilt away the focus unit and tighten the clamp knob again.
There is now room for changing the lens. After changing the lens please loosen the clamp knob, set the focus unit to the
desired angle and gently press the focus-gear to the lens strip and finally tighten the clamp knob.
Cambo Photographic Industry B.V. / Cambo Video and Broadcast Products B.V.
Cambo R&D 5-7-2012
This instruction manual is prepared with care, although no responsibility, financial or otherwise, is accepted for any consequences related the information stated in
this instruction manual. All specifications in this instruction manual are subject to change without notice.
For more information please visit the Cambo web site: www.cambo.com
