Chapter 6: RFU-C Configurations
Antenna Connection
phn-4026 003v000
Page 6-7
Chapter 6:
RFU-C Configurations
Note
For the exact marketing models of items described in the List of Items for each configuration,
see section
Available Adapters and Installation Kits
1+0 Direct Mount Installation
List of Items
Table 12
Required items for 1+0 Direct Mount
Item Description
Quantity
Remarks
1
RFU-C RADIO
1
Required Tools
The following tools are required for the RFU-C installation:
•
Metric offset hexagon key wrench #6
•
Phillips #2 screwdriver
Procedure
To install the RFU-C in a direct mount 1+0 configuration:
Caution
Do not remove the transparent pressure window located on the antenna interface.
Note
If necessary, change the antenna polarization by rotating the RFU-C in accordance with the relevant
antenna installation guide.
