Chapter 1: Introduction
System Overview
phn-3963_008v000
Page 1-8
Radio Summary Page
The Radio Summary page gathers the key link and radio parameters on a single page for quick viewing. To display
the Radio Summary page, select
Radio Summary
from the Web EMS main menu.
Figure 8
Radio Summary Page
The Radio Summary page includes:
•
Link Status
– Link status per radio carrier, including whether or not the link is Up, groups to which the link is
assigned (such as LAG, XPIC, protection, and/or Multi-Carrier ABC), and the IP address (both IPv4 and IPv6) of
the remote carrier. For additional information, see
Configuring the Radio Parameters
.
•
Radio Information
– The TX and RX frequencies, frequency separation, and channel bandwidth on which the
link is operating. For additional information, see
Configuring the Radio Parameters
.
•
Remote Radio Parameters
– Key information about the status of the remote carrier. For additional
information, see
Configuring the Remote Radio Parameters
•
Radio
Transmitter
– Mute status, maximum and operational TX level, modulation, and bit rate. For additional
information, see
Configuring the Radio Parameters
.
•
Radio Receiver
– Receiver PMs and statistics, including defective blocks, modem MSE, and RX level,
modulation, and bit rate. For additional information, see
Configuring the Radio Parameters
and
The Radio Summary page can be customized to include only specific columns and tables. This enables you to hide
information you do not need in order to focus on the information that is most relevant.
To hide a specific section of the Radio Summary page, click the section title. To display a section that has been
hidden, click the section title again.
To customize which columns, appear in a section, click next to the section title. A list of columns is displayed.
Select only the columns you want to display and click again.
Note
When one or more columns are hidden, the icon turns white ( ).