Cambium Networks PTP 850E, User Manual, Page: 108 / 560

Chapter 4: Unit Management Backing Up and Restoring Configurations
phn-3963_008v000
Page 4-25
1. Select Platform > Configuration > Backup Files . The Backup Files page opens. For a description of the
information provided in the Backup Files page, see Table 17 Backup Files Page Columns .
Figure 50 Backup Files Page
Table 18 Backup Files Page Columns
Parameter Definition
File number A number from 1 to 3 that identifies the restore point.
Original system type The type of unit from which the backup configuration file was created.
Software version The software version of the unit from which the backup configuration file
was created.
Time of creation The time and date on which the configuration file was created.
Original IP address The IP address of the unit from which the configuration file was created.
System ID The System ID, if any, of the unit from which the configuration file was
created. This is taken from the
Name field in the Unit Parameters page.
See Configuring Unit Parameters .
Valid Reserved for future use.
Setting the Configuration Management Parameters
When importing and exporting configuration files, the PTP 850 functions as an FTP or SFTP client. You must install
FTP or SFTP server software on the PC or laptop you are using to perform the import or export. For details, see
Installing and Configuring an FTP or SFTP Server .