Cambium Networks PTP 850E, User Manual, Page: 116 / 560

Chapter 4: Unit Management Configuring Unit Parameters
phn-3963_008v000
Page 4-33
Configuring Unit Parameters
To view and configure system information:
1.
Select Platform > Management > Unit Parameters . The Unit Parameters page opens.
2. Table 25 describes the fields in the Unit Parameters page.
Figure 54 Unit Parameters Page
Table 19
Unit Parameters
Parameter Definition
Name A name for the unit (optional, up to 128 characters). This name appears at the
top of every Web EMS page.
Description Descriptive information about the unit. This information is used for debugging,
and should include information such as the unit type.
System up time The time since the system was last reinitialized.
Contact person The name of the person to be contacted if and when a problem with the
system occurs (optional).
Location The actual physical location of the node or agent (optional).