Cambium Networks PTP 820S Technical Description Download Page 202

Page: 202 / 208

Chapter 7: Specifications

Physical and Electrical Specifications

PoE Injector Specifications

Power Input

Table 71 Power input specifications

Standard Input

-48 or +24VDC (Optional)

DC Input range

±(18

/40.5 to 60) VDC

Environmental

•

Operating: ETSI EN 300 019-1-4 Class 4.1

Temperature range for continuous operating temperature with high reliability:
-33

C to +55

C (or -27.4

F to 131

F )

Temperature range for exceptional temperatures; tested successfully, with limited margins:
-45

C to +60

C (or -49

F to 140

F )

Humidity: 5%RH to 100%RH
IEC529 IP66

•

Storage: ETSI EN 300 019-1-1 Class 1.2

•

Transportation: ETSI EN 300 019-1-2 Class 2.3

Standards Compliance

Table 72 Standards compliances

Specification

Standard

EMC

EN 301 489-1, EN 301 489-4, Class A (Europe)
FCC 47 CFR, part 15, class B (US)
ICES-003, Class B (Canada)
TEC/EMI/TEL-001/01, Class A (India)

Safety

EN 60950-1
IEC 60950-1
UL 60950-1
CSA-C22.2 No.60950-1
EN 60950-22
UL 60950-22
CSA C22.2.60950-22

+18VDC extended range is supported as part of the n24VDC support.

Page 7-45

Summary of Contents for PTP 820S

















































































































































































































Search results

Summary of Contents for PTP 820S

Reviews:

Cambium Networks PTP 820S, Technical Description, Page: 202 / 208

Search results

Summary of Contents for PTP 820S

Reviews: