Page 83 of 110
Figure 34: Vertical Polarization – Radio and Installation and Alignment Kit
Figure 35: Vertical Polarization – Screws Location
Performing Antenna Alignment Using the Enhanced Alignment Kit
You can easily adjust the azimuth and elevation of the antenna using a number of screws and nuts located on the
installation and alignment device (
.
Adjusting the Antenna Azimuth
Note
For wall-mount installations, if it is necessary to adjust the azimuth by more than 45°, you must first
adjust the position of the Azimuth Screws. See Extending the Azimuth Range.
Summary of Contents for PTP 820E
