Chapter 7: Quality of Service (QoS)
Configuring Egress Shaping
phn-3963_004v000
Page 7-61
Figure 164 Queue Shaper Profile Page
2.
Click Add. The Queue Shaper – Add page opens, with default values displayed.
Figure 165 Queue Shaper Profile – Add Page
3.
In the Profile ID field, select a unique ID to identify the profile. Permitted values are 1-31.
4.
Optionally, in the Description field, enter a description of the profile.
5.
In the CIR field, enter the Committed Information Rate (CIR) assigned to the profile, in bits per
second. Permitted values are:
o
16,000 - 32,000,000 bps, with granularity of 16,000.
o
32,000,000 - 131,008,000 bps, with granularity of 64,000.
6.
Click Apply, then Close.
Editing a Queue Shaper Profile
To edit a queue shaper profile:
1.
Select Ethernet > QoS > Shaper > Queue Profiles. The Queue Shaper Profile page opens
(
