Chapter 17: Radio Configuration (CLI)
Configuring and Viewing Radio PMs and Statistics (CLI)
phn-3965_006v002
Page 17-28
radio [1/1]>mrmc pm-acm show interval 24hr
MRMC PM Table:
==============
Interval Integrity Min profile Max profile Min bitrate Max bitrate
=============================================================================
===
0 1 0 0 43389 43389
4 1 0 0 43389 43389
5 1 0 0 43389 43389
6 1 0 0 43389 43389
8 1 0 0 43389 43389
11 1 0 0 43389 43389
15 1 0 0 43389 43389
17 1 0 0 43389 43389
radio [1/1]>
Table 172
ACM PMs (CLI)
Parameter
Description
Interval
The number of the interval: 1-30 for daily PM reports, and 1-96 for 15 minute
PM reports.
Integrity
Indicates whether the values received at time and date of the measured
interval are reliable. "1" in the column indicates that the values are not
reliable due to a possible power surge or power failure that occurred at that
time.
Min profile
Indicates the minimum ACM profile that was measured during the interval.
Max profile
Indicates the maximum ACM profile that was measured during the interval.
Min bitrate
Indicates the minimum total radio throughput (Mbps), delivered during the
interval.
Max bitrate
Indicates the maximum total radio throughput (Mbps), delivered during the
interval.
Configuring the XPI Thresholds and Displaying the XPI PMs
(CLI)
To configure the modem XPI threshold for calculating XPI Exceed Threshold seconds, go to radio view and enter
the following command:
Summary of Contents for PTP 820 Series
