Cambium Networks PTP 820 Series, User Manual, Page: 362 / 1149

Chapter 5: Radio Configuration Configuring and Viewing Radio PMs and Statistics
phn-3965_006v002
Page 5-48
Displaying MSE PMs and Configuring MSE PM Thresholds
To display modem MSE (Minimum Square Error) PMs per radio:
1. Select Radio > PM & Statistics > MSE . The MSE PM report page opens.
Figure 180 MSE PM Report Page
2. In the Interface field, select the interface that holds the radio for which you want to display PMs.
3. In the Interval Type field:
o
To display reports in 15-minute intervals, select 15 minutes .
o
To display reports in daily intervals, select 24 hours .
Table 56 describes the Modem MSE PMs.
Note
To display the same parameters for a specific interval in a separate page, select the interval in the
Modem MSE PM table and click
View .
Table 56 Modem MSE PMs
Parameter Definition
Interval For 24-hour intervals, displays the date of the interval. For 15-minute
intervals, displays the date and ending time of the interval.
Min MSE (dB) Displays the minimum MSE in dB, measured during the interval.
Max MSE (dB) Displays the maximum MSE in dB, measured during the interval.