Chapter 4: Legal and regulatory information
Compliance with safety standards
Page 4-63
Compliance with safety standards
This section lists the safety specifications against which the PTP 550 has been tested and
certified. It also describes how to keep RF exposure within safe limits.
Electrical safety compliance
The PTP 550 hardware has been tested for compliance to the electrical safety specifications
listed in
Table 27 PTP 550 safety compliance specifications
Region
Standard
USA
UL 60950-1, 2nd Edition; UL60950-22
Canada
CAN/CSA C22.2 No.60950-1-07, 2nd Edition; CAN/CSA C22.2 No.60950-22-07
EU
EN 60950-1:2006 + Amendment 12:2011, EN 60950-22
International
CB certified to IEC 60950-1: 2005 (modified); IEC 60950-22: 2005 (modified)
Electromagnetic compatibility (EMC) compliance
The PTP 550 complies with European EMC Specification EN301 489-1 with testing carried out to
the detailed requirements of EN301 489-4.
Note
For EN 61000-4-2: 1995 to 2009 Electro Static Discharge (ESD), Class 2, 8 kV air, 4 kV
contact discharge, the PTP 550 has been tested to ensure immunity to 15 kV air and
8 kV contact.
lists the EMC specification type approvals that have been granted for PTP 550
products.
Table 28 EMC emissions compliance
Region
Specification (Type Approvals)
Europe
ETSI EN301 489-4
Human exposure to radio frequency energy
Relevant standards (USA and EC) applicable when working with RF equipment are: