Cambium Networks PMP/PTP 450i Series, User Manual

Page: 113 / 132

Chapter 2: Installing a GPS receiver
Page 2-49
4 Slide the GPS antenna bracket onto the U-bolts.
5 Slide the ring washers (provided) onto the U-bolts.
6 Slide the lock washers (provided) onto the U-bolts.
7 Use the nuts (provided) to securely fasten the bracket to the U-bolts.
Please refer to the PMP Synchronization Solutions User Guide located on the Cambium website
( http://www.cambiumnetworks.com/resources/pmp-synchronization-solutions ).
Cabling the GPS Antenna
Connect the GPS coax cable to the female N-connector on the GPS antenna. Please refer to the
PMP Synchronization Solutions User Guide located on the Cambium website
( http://www.cambiumnetworks.com/resources/pmp-synchronization-solutions ).
Installing and connecting the GPS LPU
Install and ground the GPS drop cable LPU at the building (or cabinet) entry point, as described in Install the bottom
LPU on page 6-19 .