Cambium Networks PMP 450 AP, Configuration Manual

Page: 350 / 649

Chapter 2: Tools Using Spectrum Analyzer tool
Page
2-322
Spectrum Analyzer page of SM
The Spectrum Analyzer page of SM is explained in Table 99.
Table 97 Spectrum Analyzer page attributes - SM
Attribute Meaning
Display Data Path Refer Table 96 on page 2-320
Data Refer Table 96 on page 2-320
Display Refer Table 96 on page 2-320
Min and Max
Frequencies in KHz To scan min to max range of frequencies, enter min and max frequencies in
KHz and press Set Min and Max to Full Scan button.
To scan +/- 40 MHz from center frequency, enter center frequency in KHz
and press Set Min And Max To Center Scan +/- 40KHz button.
Session Status This field displays current session status and rates. The session states can be
Scanning, Syncing, Registering or Registered.
Registered AP This field displays the information of AP to which this device is registered.
Scanning Bandwidth This field allows to select the scanning bandwidth when running Spectrum
Analysis.