Cambium Networks ePMP, User Manual

Page: 91 / 478

CAMBIUM NETWORKS
026v003
91
Radio spectrum planning
This section describes how to plan ePMP links to conform to the regulatory restrictions that apply
in the country of operation.
Caution
The user must ensure ePMP product operates in accordance to local regulatory limits.
Note
Contact the applicable radio regulator to check if registration of the ePMP link is required.
GENERAL WIRELESS SPECIFICATIONS
The wireless specifications that apply to all ePMP variants are listed under Table 65 . The wireless
specifications that are specific to each frequency variant are listed in Table 66 and Table 67 .
Table 65 ePMP wireless specifications (all variants)
Item Specification
Channel selection Automatic and Manual selection (fixed frequency).
Manual power control To avoid interference to other users of the band, maximum
power can be set lower than the default power limit.
Integrated device antenna
type Patch antenna
Duplex scheme Adaptive TDD (with optional Standard 802.11n Wi-Fi on SM)
Range 21 mi (5 MHz channel bandwidth)
17 mi (10 MHz channel bandwidth)
13 mi (20 MHz channel bandwidth)
9 mi (40 MHz channel bandwidth)
Over-the-air encryption AES
Error Correction FEC
Table 66 ePMP 2000 wireless specifications (per frequency band)
Item 5 GHz
RF band (GHz) 5150 - 5970 MHz
Channel bandwidth
5 MHz, 10 MHz, 20 MHz or 40 MHz
Typical antenna
gain Connectorized antenna – 18 dBi