CAMBIUM NETWORKS
15
Typical integrated radio deployment
An ePMP integrated radio site typically consists of a supporting structure such as a pole, mast, or building for
the radio, and an equipment building or moisture-proof enclosure for the indoor equipment (power supply,
networking equipment), as shown here in a typical building installation. If the radio is to be mounted on a
metal tower or mast, then in addition to the general protection requirements (see section
), the
following requirements must be observed:
The equipment must be lower than the top of the structure or its lightning air terminal.
The metal tower or mast must be correctly grounded.
External
ground bar
Ground cable
Ground ring
Outdoor CAT5e cable: shielded
with copper-plated steel
Equipment building
Building ground system
600SS
Cat5e cable
Port “10/100
Mbit Data +
Power”
Network
switch
Port “10/100
Mbit Data”
To power
mains
Power
supply
Cambium SMMB2A
Universal Mounting
Bracket
