Connecting 60 GHz cnWave™ Products
37
4. Remove the latch of the RJ45 plug to remove the cable from PSU port.
Installing the PSU
Install one of the following types of PSU:
l
Installing the 60W DC power injector
l
l
Installing the V1000 power injector
Warning
Always use an appropriately rated and approved AC supply cord-set in accordance with the
regulations of the country of use.
Attention
As the V5000/3000 60W DC Power Injector and V1000 15 W power injector are not water
proof, locate it away from sources of moisture, either in the equipment building or in a
ventilated moisture-proof enclosure. Do not locate the PSU in a position where it may exceed
its temperature rating.
Attention
Plug only recommended Cambium 60 GHz cnWave™ PSU into the PSU port of the ODU. (for
recommended partnumbers, refer
60 GHz cnWave™ User Guide). Plugging any other
unsupported device into PSU port of the ODU may damage the ODU and device.