for use until the purchased license is received. Issue the
commands:
cd
/usr/lpp/cbxdpf
mv license.30day license
cfgmgr
Licenses for OEM versions of the driver are obtained from the
storage vendor who provided the software.
The generic version of DPF purchased from Cambex is licensed
for use only on Cambex cards and on only one LPAR. A
license token is provided with the purchase. Contact Cambex
support by email to obtain a license. You will need to provide
The license tokens for each card
Host machine ID from 'uname –a -L'
The output of /usr/lpp/cbxfc/dpfinfo
How to set path preferences
Controller preference is set on the RAID controller using RAID
Management software provided by the storage vendor. HBA
preference and Target preference are set in the host using the
dpfutil Path Management software, or in the smit menus. The
preference value, although internally combined numerically, is a
yes/no value in the user interface. HBA preference outweighs
controller preference. It defaults to yes (all HBAs are preferred)
but can be changed to no with the tool. Target preference ranks
lower than controller preference and defaults to no (no preferred
path) but may be changed to yes with the tool.
Path priority is the combination of the following factors, which
are listed from highest to lowest.
20
