Camanio Care AB
Hästholmsvägen 32, SE-131 30 Nacka
E-mail: [email protected]
Telephone: +46(0)8 – 12 44 88 55
15
17. Fasten the projector, with the lens facing the dome, by using the locking
screw on the projector support at the top of the projector arm. This screw
fits the thread placed in the middle of the bottom panel of the projector.
18.
Plug the mains cable and the HDMI connector from the projector arm
into the projector. Do not pull the cables. Make sure the connectors are
properly inserted.
19. Connect the cables from the frame cable duct to the ones extending from
the projector arm; mains cable to mains splitter, HDMI to HDMI extension.
Connect the USB connector from the cable duct to the USB hub, and the
network connector to the network jack.
20.
Push the USB extension into place in the black cable duct on the floor.
21.
Plug the USB cable at the other end of the floor cable duct into the USB hub.
HDMI
